English

banner

UL waterproof dali-2 & push dimmable dt8 driver power supply 12v/24v 200w

The 200w constant voltage led driver adopts DALI-2 dimming protocol IEC62386, and the dimming mode is dali-2 & push dimming. The dimming range is 0-100% to achieve smooth dimming without flicker
  • Brand:

    SMARTS
  • Item No.:

    SMT-JB12200V-DP2-2C
  • Input Voltage:

    100-277Vac
  • Output Voltage:

    12VDC/24VDC/36VDC/48VDC
  • Working Mode:

    Constant Voltage
  • Dimming mode:

    DALI 2&PUSH Dimmable
  • Size:

    293*125*40mm
  • Certification:

    UL
Products description

UL waterproof dali-2 & push dimmable dt8 driver power supply 12v/24v 200w

smarts dali-2 & push dimmable led driver has built-in NFC function to adjust the output voltage and set the address code, quick and convenient setting, led driver working efficiency up to 93.5%, suitable for intelligent led lighting project installation


  Specification  

Model SMT-JB12200V-DP2-5C SMT-JB24200V-DP2-5C SMT-JB36200V-DP2-5C SMT-JB48200V-DP2-5C
Output DC Voltage 12V(12-13.5V) 24V(24-26V) 36V(36-38V) 48V(48-50V)
Voltage Tolerance ±0.2V
Rated current 16.67A 8.33A 5.56A 4.17A
Rated power 200W
Voltage Regulation 0.50%
Load Regulation 2% 1% 1% 1%
Input Voltage Range 100-277VAC 
Frequency Range 47 - 63Hz
Power Factor(Typ.)@ full load PF≥0.98@120VAC  PF≥0.97@230VAC  PF≥0.95@277VAC (Full loading)  
THD(Typ.)@ full load ≤10%@120VAC ;  ≤10%@230VAC;  ≤15%@277VAC
Efficiency(Typ.)@ full load

90%@120VAC    

91.5%@230VAC/277VAC

92%@120VAC    

93.5%@230VAC/277VAC

92%@120VAC    

93.5%@230VAC/277VAC

92%@120VAC    

93.5%@230VAC/277VAC

Protection AC Current(Max.) 2.3A
No-load powerConsumption(optional) 1.35W(@120V)
1.05W(@230V)
1.15W(@277V)
1.40W(@120V)
1.10W(@230V)
1.20W(@277V)
1.45W(@120V)
1.15W(@230V)
1.25W(@277V)
1.55W(@120V)
1.25W(@230V)
1.35W(@277V)
Standby powerConsumption(optional) 0.28W(@120V)
0.43W(@230V)
0.48W(@277V)
0.25W(@120V)
0.42W(@230V)
0.48W(@277V)
0.28W(@120V)
0.43W(@230V)
0.49W(@277V)
0.29W(@120V)
0.44W(@230V)
0.49W(@277V)
Inrush Current (Typ.) 38.4A,510us@50%Ipeak@120VAC
88.0A,120us@50%Ipeak@230VAC
48.0A,560us@50%Ipeak@277VAC 
Leakage current <0.5mA 
  Short Circuit Hiccup mode, recover automatically after fault condition is removed
Over Load ≤120% ,hiccup mode, recover automatically after fault condition is removed 
Over temperature Ambient temp. over 55℃±10℃,output will be off; recovers automatically after temp. drops.
Environ-ment Working TEMP. -40 ~ +70℃ (see below derating curve)
Working Humidity 20 ~ 95%RH,non-condensing 
Storage TEM.,Humidity -40 ~ +80℃,10 ~ 95%RH
TEMP.coefficient ±0.03%/℃(0 ~ 50℃)
Vibration 10 ~ 500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes 
Safety & EMC Safety standards EN61347-1 EN61347-2-13(EU) & UL8750(US) & UL1310
Withstand voltage I/P-O/P:1.8KVAC   I/P-FG:1.8KVac  O/P-FG:1.8KVac
Isolation resistance I/P-O/P:100MΩ/ 500VDC/ 25℃/ 70%RH  
EMC Emission EN55015  EN61000-3-2-3(EU)≥50% Load  &  FCC Part 15 B (US)
EMC Immunity EN61000-4-2,3,4,5,6,11  EN61547
Others Net Weight 1.05kg/pcs
Dimension 293*125*40mm (L*W*H)
packing Qty: 20cs/ctn;   G.W: 22.7kg/ctn;    Ctn size: 330*300*215mm   
Notes 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
Click Send Email for Details
Click skpye 24 hours Online Reply
Scan to start our communication
Back to top


  Mechanical Specification  


Input & Output wiring

※Input electronic cable 3*18AWG, the green cable connect with (FG) ,Black with AC (L), White with AC(N) (US);

※Output : 12V electronic cable 3*16AWG to be connected to LED Light;  

          24V electronic cable 3*18AWG to be connected to LED Light;  

Dimming cable   

Dimming electronic cable 3*18AWGBrown DA/N and Purple DA/L (No polar) connected to the DALI BUS when use DALI function.

Brown (N) is connected to AC (N) while Purple (L) and pink (CCT Push )connected to CCT Push dim switch dimmer( L) when use Push function.

※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.

CCT (TW) dimming: electronic cable, Black is output ( V+) Positive, While (CW-) and Yellow (WW-) are output (V-) negative  

Note:  there is external antenna at output side.  Don't disassemble!


 Dimming Operation 


Note: For DALI Dimming Wiring Diagram 3, please noted that only one DALI power is need in the DALI bus, so no extra DALI power is needed if the Master or Dimmer already includes the DALI Power.   


 Dimming Operation 


The default address for the DALI-2 LED driver is 001.

Address settings device:

Address settings:

① RDM setting address:

Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.   

② NFC setting address:

The DALI-2 led drivers’ address can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DALI-2 LED drivers


Adjust output voltage Operation

Adjust output voltage slightly for DALI-2 LED drivers

1) The driver output voltage can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DALI-2 LED drivers

2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 1

Rated Vol.

Level 1

Level 2

Level 3

Level 4

Level 5

Level 6

Level 7

Level 8

Level 9

Level 10

12V

12.00V

12.16V

12.32V

12.48V

12.64V

12.80V

12.96V

13.12V

13.28V

13.50V

24V

24.00V

24.22V

24.44V

24.66V

24.88V

25.1V

25.32V

25.54V

25.66V

26.00V

36V

36.00V

36.22V

36.44V

36.66V

36.88V

37.10V

37.32V

37.54V

37.66V

38.00V

48V

48.00V

48.44V

48.44V

48.66V

48.88V

49.10V

49.32V

49.54V

49.66V

50.0V


Simple operation about DALI-2 LED driver address reset and adjusting output voltage slighting by a mobile with NFC APP (set NFC) or NFC handheld device (NFC read & write device: NFC-RW)  

Ø Mobilephone NFC APP setting:



  Related Products  

10w constant current led driver

200w DALI-2 dimmable led driver UL certified, input voltage in 100-277vac metal case design, can effectively protect power from external force damage, with 7 year warranty



Model: SMT-JB24200V-DP2

Input Voltage: 100-277VAC

Dimming Mode: DALI-2 & push Dimmable
Size: 293*125*40mm (L*W*H)
Certification:UL


Leave a message
To know more our LED drivers/power supplies/LED transformers, pl. send email to us, we will reaply you soon.
Categories
Related Product
30w led driver

dali 2&push dimming constant voltage led drivers power supply 12v/24v/36v/48v 30w

Plastic case dali 2& push dimmable 12V/24V/36V/48V 30W led driver Constant voltage working mode, efficiency up to 83%, dimming range from 0 to 100%, both ends can be removed, no exposed wires, easy to install, quick and safe
12v 60w dimmable led driver

60w 12v dali 2& PUSH dimmable LED driver power supply price

Smarts 60W DALI dimming led driver The SMARTS 60W Dali Dimming LED driver is UL certified. The input voltage ranges from 100 to 277vac. The built-in NFC function allows you to adjust the output voltage as required
100w led power supply

dali 2 & push dimming 12 volt constant voltage light led driver power supply

ip67 waterproof constant voltage led driver 100W is dali2&push dimming mode, in accordance with dali protocol, input voltage is 100-277vac, the body is made of aluminum shell, can effectively protect the internal parts of the body from external damage, suitable for outdoor installation projects in humid areas
dali dimmable led drivers

150w 12V/24v dali 2& push dimmable constant voltage led driver price

The dali2 &push dimmable led driver 150W complies with dali dimming protocol IEC62386 and works in constant voltage mode with an efficiency of up to 91%
waterproof led power supply 12v 200w

UL certification 200W dali2&push dimmable constant voltage led power supply

dali2 & push dimming led driver 200W Input voltage of 100-277vac dimming range of 0-100%, with short circuit, overload, overtemperature protection design, can protect the life of the power supply from all aspects
300w led drivers

dali 2& push dimmable electronic led power supply transformer 12v 300w led driver

high power dali 2 & push dimming 300W led driver Aluminum case, cooled by free air convection, good heat dissipation performance, waterproof class ip67, suitable for outdoor intelligent lighting projects

SMARTS

Connect With Us
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Way to contact us.
Copyright © Swin Technology Co., Ltd..All Rights Reserved. dyyseo.com / Sitemap / XML
Welcome to SMARTS
To know more our LED drivers/power supplies/LED transformers, pl. send email to us, we will reaply you soon.

Home

Products

About

Contact