Class2 0-10v dimmable power supply led dimming driver 12v transformer lights
SMT-012-036VD is 12V DC 0-10V led dimming driver. The input voltage is 100-265Vac, which is able to use in North American and European markets. Our 0-10V dimmable led driver with PWM output frequency, it is compatible with 0-10v and 1-10V Lutron dimmers.
Specification of led dimming driver
|
Model |
SMT-012-036VD |
SMT-024-036VD |
|
|
Output |
DC Voltage |
12VDC |
24VDC |
|
|
voltage Accuracy |
±3% |
|
|
|
Current |
3.0Amp |
1.5Amp |
|
|
Rated power |
36W |
36W |
|
Input |
Voltage Range |
100-130VAC, 170-265VAC |
|
|
|
Frequency Range |
47～63HZ |
|
|
|
PF(Typ.） |
PF>0.90 |
|
|
|
Full Load Efficiency（Typ） |
>88% |
>89% |
|
|
AC Current (Typ.） |
0.41A@110VAC |
0.21A@220VAC |
|
|
Leakage current |
﹤0.62mA/110VAC, ﹤0.65mA/220VAC |
|
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|
|
|
Over voltage |
≦280VAC |
|
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
|
|
Environme |
Working TEMP. |
-40～+50℃ |
|
|
|
Working Humidity |
20～95%RH,non-condensing |
|
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
|
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
|
|
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
|
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. Waterproof rate: IP40 |
|
|
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
|
|
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
|
|
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
|
|
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
|
|
Others |
Weight |
0.4Kg |
|
|
|
Size |
180*60*34mm（L*W*H） |
|
|
|
packing |
355*215*215mm/20pcs /CTN |
|
|
Notes |
1. All parameters NOT specially mentioned are measured at 110v~220VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
||
Compatible Dimmer Type
SMT50-D2 is CE 0-10V dimmer. Input voltage is 100-265VAC, Frequency 50/60Hz, Output Interface:DC0-10V output can control LED 0/1-10V DIM driver. When the dimmer power off, long touch the BRIGHTNESS LEVEL KEY current brightness you chosed can be saved. When the dimmer power on, long touch ON/OFF KEY, The BRIGHTNESS LEVEL KEY will be restore default setting. When the dimmer power off, long touch ON/OFF KEY to open or shut the buzzer warning tone.
Related Products
|
12V 200w 0-10v dimmable driver are CE ETL/cETL listed with 100-265Vac input voltage, suitable for EU and AU markets. It has PWM output frequency. 5 years warranty.
Mode：SMT-012-200VD intput voltage：100~265V AC Efficiency > 90% Size：256*78*47mm （L*W*H） Weight：0.5Kg/pcs |
