SMARTS ETL list power supply 120w 12v DALI dimmable led driver
120w 12v DALI dimmable led driver all parameters NOT specially mentioned are measured at 110V, 220VAC input , rated load and 25℃of ambient temperature,Compared with the ES 120w led power supply, the aluminum shell material has more waterproof functions, and can be installed indoors and outdoors.
Specification
|
Model |
SMT-012-120VM |
SMT-024-120VM |
SMT-036-120VM |
||
|
Output |
DC Voltage |
12VDC |
24VDC |
36VDC |
|
|
|
Voltage Accuracy |
±0.5V |
|||
|
|
Rated current |
0～10.0A |
0～5.0A |
0～3.33A |
|
|
|
Rated power |
120W |
120W |
120W |
|
|
Input |
Voltage Range |
100-130VAC, 170-265VAC |
|||
|
|
Frequency Range |
47～63HZ |
|||
|
|
Power Factor (Typ.） |
PF≧0.90/100V, 220V |
|||
|
|
Full Load Efficiency（Typ.） |
>88%(110,220V) |
>88%(110,220V) |
||
|
|
AC Current（Typ.） |
1.38A@110VAC) |
0.69A@220VAC |
||
|
|
Leakage current |
﹤0.73mA/110, ﹤0.76mA/220VAC |
|||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|||
|
|
Over Current |
≦1.4*I out |
|||
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
|||
|
Environment |
Working TEMP. |
-40～+50℃ |
|||
|
|
Working Humidity |
20～95%RH,non-condensing |
|||
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
|||
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
|||
|
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
|||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 IP67 |
|||
|
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
|||
|
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
|||
|
|
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
|||
|
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level （surge4KV） |
|||
|
Others |
Weight |
1.3Kg |
|||
|
|
Size |
230*69*45mm（L*W*H） |
|||
|
|
packing |
355*215*215mm/10pcs/CTN 240*70*50 mm for inner box |
|||
|
Not es |
1. All parameters NOT specially mentioned are measured at 110V, 220VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
||||
| Label |
 |
||||
 |
 |
 |
 |
Problem Analysis
Question:
What is class 2 standard?
Answer:
the requirements of class 2 are :
1. less than or equal to 5A
2. less than 100w. And should satisfied with these two conditions at the same time.
packaging & shipping
inner box-white box + outer carton- standard exporting carton for packing
- MOQ: 1 pcs
- Delivery: 7 working days for sample order,12 working days for 500pcs.
- Shipping freight are quoted under your requests.
- Loading port: Xiamen
