The new SMARTS 5 in 1 dimming LED power supply has been upgraded on the traditional LED power supply, making it have many excellent performances, such as: multi-current dial code output, high compatibility, small size, etc. 1. Multi-current DIP output LED dimming power supply can realize the constant current output of the power supply, and can also choose a variety of curr...
1. No flicker SMARTS DALI dimming power supply adopts DALI & Push hybrid dimming mode with a dimming range of 1%-100%, which can control each lamp more accurately. 2. Wide application range The new dimming power supply has a compact size of 330*30*22mm and an output voltage of 12V/24V. It is suitable for tri-proof lights, line lights, etc., and is widely used in subway, office, education, medi...
For electrical appliances, faults and damages caused by thunderstorms also occur frequently. Smarts' new Dali waterproof ultra-thin dimming power supply can solve this problem well. 1. Ultra-thin design, more space saving The dimming power supply adopts an ultra-thin design with a size of 330*32*23mm, which saves installation space and is suitable for occasions with high requirements on the size. ...
Power factor correction is abbreviated as PFC, which is mainly to improve the ratio of effective power to apparent power at the input end of a power supply. It is one of the common circuits in led dimmable power supplies. Generally, the power factor of the input end of the model without PFC circuit is only 0.4~0.6, but with active PFC circuit, it can reach more than 0.95 Active power factor correc...
(1) Dimming method 5 in 1 multi-current dial code series is a power supply that supports multiple currents, and the triac dimming method can achieve smooth dimming. It is a driving power supply that can be dimmed by 1-10v signal and pwm signal. (2) Input and output parameters This new smarts power supply is a constant current dimming power supply, support 250mA-700mA Ma constant current output, th...
First, the output current of the dimmable constant current led driver is constant, and the output voltage changes with the VF value of the LED. This is in line with the characteristics of the LED and keeps the luminous brightness constant. The LED is greatly affected by the current change, and the constant current drive can be extended The life of the LED; in addition, the luminous efficiency and ...
This product is a 10W multi-current dimming driver, input voltage range: 100-277VAC, smooth dimming curve, no flicker, short circuit, overvoltage, overload protection, suitable for indoor LED lamps, such as downlights, panel lights, Spotlights, etc. Small size The size of the product is 78*36*29 MM. The small and exquisite figure determines that this dial led power supply constant current can not ...
1. Constant current led drive type: The output current of the constant current drive circuit is constant, and the output DC voltage varies within a certain range with the size of the load resistance. The smaller the load resistance, the lower the output voltage. The larger the load resistance, the higher the output voltage. ①The constant current drive circuit is ideal for driving LEDs, but the pri...
LED lighting is a lighting fixture made of light-emitting diodes as the light source. The LED driver power supply is a power supply device used to drive the normal light emission of the LED lighting lamp, and its core is the LED driver chip. Also known as the LED driver LC. Most of the early LED drive power supplies used constant voltage mode, which had many drawbacks. At present, most LED drive p...
The 12v 50w led driver is a switching power supply, which is to filter and rectify the 220V AC power to obtain 300V DC, which is converted into a high-frequency square wave voltage through the switch tube and the oscillating circuit, and then coupled through a high-frequency transformer, and then filtered to obtain the required The voltage. 1)If the output filter capacitor breaks down (explosion),...