There are kinds of protection mode to a Electric products, for electronic LED drivers, its switch off, hiccup mode and constant current mode for overload protection, Then what would be constant current mode performance for a constant current or constant voltage led driver ? When the driver gets into overload CC mode protection, the voltage of driver will be lower, but the current would be constant...
UL is a global independent safety science institution with over 120 years experience in innovating safety solutions. Audits, certifies, inspets, tests,, educates, validates and verifies to maintain safety standards. When UL has tested samples of our led drivers which sent from our factory and confirmed that they will meet UL’s published, nationally-recognizedo safety requirements, then these led p...
Firstly, you are supposed to consider the load characteristics. In order to improve the reliability of the system, it is recommended that the switching power supply work at 50% -80% load, that is, assuming that the power used is 20W led lights, the switching power supply with an output power of 25W to 60W led power supply should be selected. So far, most of our UL listed led power supply has the p...
So far, all of our Smarts brands current led power supplies can't do IP68 rating. Actually, IP68 has strict waterproof requirements for the wiring ports at both ends. IP68 is one of the most advanced dustproof and waterproof specifications. IP68 rated equipment can completely prevent dust from entering, and can be immersed in water for a long time under certain pressure without damaging the equipm...
Nowadays, with the rapid development of technology, many international retail stores realize the importance of lighting. Therefore, the Internet of Light has become a reality in retail stores. Fortunately, led dimmable driver suppliers are part of LED lighting and have entered retail stores. International retail stores provide customers with a new way to contact them. The new service co...
The triac dimmable led driver smarts Electronics offered is the most efficient one for LED under cabinet lights, LED tape lights and various LED sign fixtures installations. Drivers can be made as 20KHZ PWM output which are flickering free. No buzzing to be emitted by driver when triac dimmed. A universal input and perfect compatibility with a wide range of 120v triac dimmer & 220V triac dimme...
In order to turn on and operate the LED strip lights,12v & 24v led driver plays an important roles in the strip light applications. Function of LED driver is similar with a ballast does for fluorescent light bulbs. The driver processes line voltage into power suitable for the operation of an LED. The electricity for most households used are 100-347vac, but LEDs operate...
The advantages of dimming LED lights are changes the visual appearance and mood of your space. Most importantly, they are save energy. You can NOT use a non-dimming light in a dimming circuit as it may cause damage to the lamp and or circuit. But you can use a dimmable LED lights in a non-dimmable circuit. Many LED lighting are designed by&nbs...
The designation of Class 2 is vital when installing an electrical system in building project. Class 2 led drivers regulations state the wiring requirements between the output of the drivers and the input of the load , such as wire size and insulation, wire derating factors, over current protection limits and ways of wiring installation . The limited output voltage and output power delivery capabil...
Our new released product SMT-012-060VTHV2 is a 12V 60W output dimmable LED power supply suitable for a wide range of LED strip and linear lighting products, it could be used with any phase control dimmers Forward Phase (Triac/MLV) and Reverse Phase (ELV), unlike the older dimmable LED power supplies only could match well with leading edge dimmer. SMT-012-060VTHV2 with their outputs consistent whic...