120 277v canada 12v ul approved led power supply triac dimmable driver
outdoor 12v dc power supply SMT-012-180VTHW2 plastic case IP67 waterproof design for dry or damp or wet environment installations, dimmable with an electronic low voltage dimmer: (Lutron Diva DVELV-300P, Lutron Skylark SELV-300P, or Lutron Maestro MAELV-600).
Specification
model |
SMT-012-180VTHW2 |
SMT-024-192VTHW2 |
|
Output |
DC Voltage |
12V |
24V |
|
Voltage Accuracy |
±0.5V |
±0.5V |
|
Rated current |
15.0A (3*5A) |
8.0A (2*4A) |
|
Rated power |
180W |
192W |
|
Voltage Tolerance |
±0.5V |
±0.5V |
|
Load Regulation |
±1% |
±1% |
|
Voltage Regulation |
±0.5% |
±0.5% |
Input |
Voltage Range |
100~277V AC |
|
|
Frequency Range |
47~63HZ |
|
|
THD(Typ.) @full load |
<20% |
|
|
Power Factor ( Typ.) |
0.98@120VAC 0.95@277VAC |
0.98@120VAC 0.95@277VAC |
|
Full Load Efficiency(Typ.) |
86%@120V 88%@277VAC79% |
87%@120V 89%@277VAC |
|
AC Current(Typ.) |
2.2A@100VAC |
2.3A@100VAC |
|
Inrush Current (Typ.) |
19A ,50%,1.3ms @120VAC ; 38A,50%,960us @277VAC |
|
|
Leakage current |
﹤0.50mA |
|
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed. |
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
|
|
Over Loading |
≤120% constant current limiting, auto-recovery |
|
|
Over voltage |
≦140VAC(90~135V) , ≦270VAC(170~265V) |
|
Environment |
Working TEMP. |
-40~+60℃ |
|
|
Working Humidity |
20~90%RH,non-condensing |
|
|
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
|
|
TEMP.coefficient |
±0.03%/℃(0~50℃) |
|
|
Vibration |
10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes |
|
Safety&EMC |
Safety standards |
UL8750+UL1310 |
|
|
Withstand voltage |
I/P-O/P:1.88KVAC |
|
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
|
|
EMC EMISSION |
FCC 47 CFR Part 15 ,Subpart B |
|
|
EMC IMMUNITY |
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level (surge4KV) |
|
Others |
Net Weight |
1.7Kg |
|
|
Size |
276*78*47mm (L*W*H) |
|
|
packing |
329*279*176mm , 10PCS/ctn |
|
Notes |
1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. 2. Tolerance:includes set us tolerance,line regulation and load regulation . |
Mechanical Specification
Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground
Outputcable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side
Compatible Dimmer Type
Support trailing edge (ELV) dimming, ABS material, high flame retardant, suitable for led triac dimmable driver, incandescent lamps, halogen lamps, installation in bedroom, restaurant, bars and other places need dimming control.
![]() |
![]() |
Related Products
120 277v led driver class 2 LED Power Supply accepts input voltage of 120 volts AC and outputs 24 volts DC power up to 36 watts. Features short circuit and overload protection.
Mode:SMT-012-060VTHV2 intput voltage:100~277V AC pfc > 0.99 Size:188*94.5*40mm (L*W*H) UL/cUL,FCC,RoHS approval |