UL dimming triac ip67 constant voltage 12v 150w led driver power supply
SMT-012-150VTHW is triac led driver. 12v 150w triac dimming led driver can be paired with metal box with CE UL FCC ROHS certificate.Equipped with a metal junction box can not only protect the power supply, but also can be easier to install in the project than the meanwell 120W LED driver of the same power. It is compatible with leading edge and trailing edge dimmers.
Features of triac led driver
·Output constant voltage
·Input voltage range 100-277VAC
·Built-in PFC function, PF> 0.98
·Efficiency > 83% / Dimming range: 0~100% / Loading range:8~100%
·Protections:short circuit/over voltage/over heat
·IP67 design for indoor or outdoor installations
·Cooling by free air convection / Flicker-free
·Work with leading edge and trailing edge TRIAC dimmers
·Strong compatibility, flicker-free dimming
·Suitable for LED lighting and moving sign applications
·Compliance to worldwide safety regulations for lightings.
·Compatible with Forward phase, Reverse phase, Triac, MLV, ELV Dimmers
·7 years warranty
·UL/cUL listed, Class P, Type HL approval
Specification of triac led driver
|
model |
SMT-012-150VTHW |
SMT-024-150VTHW |
|
|
Output |
DC Voltage |
12V |
24V |
|
|
Voltage Accuracy |
±0.5V |
±0.5V |
|
|
Rated current |
12.5A |
6.25A |
|
|
Rated power |
150W |
150W |
|
Input |
Voltage Range |
100~277V AC |
|
|
|
Frequency Range |
47～63HZ |
|
|
|
THD(Typ.) @full load |
<20% |
|
|
|
Power Factor ( Typ.） |
0.98@120VAC 0.95@277VAC |
0.97@120VAC 0.94@277VAC |
|
|
Full Load Efficiency(Typ.) |
>84% |
>84% |
|
|
AC Current（Typ.） |
1.8A/110VAC |
|
|
|
Inrush Current （Typ.） |
15A, 50%, 1.6ms |
|
|
|
Leakage current |
﹤0.5mA/110V |
|
|
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed. |
|
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
|
|
|
Over Loading |
≤120% constant current limiting, auto-recovery |
|
|
|
Over voltage |
≦140VAC(90~135V) , ≦270VAC(170~265V) |
|
|
Environment |
Working TEMP. |
-40～+60℃ |
|
|
|
Working Humidity |
20～90%RH,non-condensing |
|
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
|
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
|
|
|
Vibration |
10～500Hz，2G 10min./1 cycle，period for 60min.each along X,Y,Z axes |
|
|
Safety&EMC |
Safety standards |
UL8750 |
|
|
|
Withstand voltage |
I/P-O/P: 1.90KVAC |
|
|
|
Isolation resistance |
I/P-O/P：100MΩ/500VDC/25℃/70%RH |
|
|
|
EMC EMISSION |
FCC Part 15 B |
|
|
|
EMC IMMUNITY |
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level （surge4KV） |
|
|
Others |
Net Weight |
1.5Kg |
|
|
|
Size |
256*78*47mm (L*W*H) |
|
|
|
packing |
329*279*176mm , 10PCS/ctn |
|
|
Notes |
1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. 2. Tolerance:includes set us tolerance,line regulation and load regulation . |
||
Simple Connection Diagram
Instruction
※This driver should be installed by qualified and professional person;
※Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
※Ensure that wiring is correct before test in order to avoid light and power supply damage;
※If the dimmable LED drivers do not work normally, pl. don’t maintain privately, but contact us: sales1@smartselectronics.com Or take a phonecall: 0086-595-22863721 ext.808
