led power supply 12v 100w 0-10V dimmable constant voltage dc led driver
SMT-012-100VDHV2 is led driver power supply 100w 12v 0-10V dimming. With junction box in one case, which can be used in wet, damp, dry location for indoor and outdoor projects. With 12 volts and 24 volts option, wattage from 30w to 300w option. SMT-012-100VDHV2 can work well with ledels's LL-F24P600W1L44 175°.
Specification:
|
model |
SMT-012-100VDH (1.0 version) SMT-012-100VDHV2 (2.0 version) |
SMT-024-096VDH (1.0 version) SMT-024-096VDHV2 (2.0 version) |
|
|
Output |
DC Voltage |
12V |
24V |
|
|
Voltage Tolerance |
±0.5V |
±0.5V |
|
|
Rated current |
8.3A |
4.0A (class 2 type) |
|
|
Voltage Regulation |
±0.5% |
±0.5% |
|
|
Load Regulation |
±1%
|
±1%
|
|
|
Rated power |
100W |
96W |
|
Input |
Voltage Range |
100-277VAC |
|
|
|
Frequency Range |
47-63Hz |
|
|
|
Power Factor(Typ.)@ full load |
0.98@120VAC 0.95@277VAC |
|
|
|
THD（Typ.)@ full load |
<20% |
|
|
|
Efficiency(Typ.)@ full load |
83% @120Vac 86%@277Vac 79% |
|
|
|
AC Current（Max.） |
1.3A@100VAC |
|
|
|
Inrush Current （Typ.） |
20A, 50%, 1.6ms |
|
|
|
Leakage current |
<0.50mA |
|
|
Protection |
Short Circuit |
shut down o/p voltage, re-power on to recover after fault condition is removed |
|
|
|
Over Loading |
≤120% constant current limiting, auto-recovery |
|
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
|
|
|
Environment |
Working TEMP. |
-40～+60℃ (see below derating curve) |
|
|
|
Working Humidity |
20～90%RH, non-condensing |
|
|
|
Storage TEMP. Humidity |
-40～+80℃,10~95%RH |
|
|
|
TEMP .coefficient |
±0.03%/℃(0~50℃) |
|
|
|
Vibration |
10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
|
|
|
Safety&EMC |
Safety standards |
UL8750+UL1310 |
|
|
|
Withstand voltage |
I/P-O/P:1.88KVAC |
|
|
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
|
|
|
EMC EMISSION |
FCC Part 15 B |
|
|
Others |
Weight |
1.37Kg (1.0 version) |
|
|
|
Size |
1.0 version: 220*94.5*40mm(L*W*H) / 2.0 version: 220*94.5*40mm(L*W*H) |
|
|
|
packing |
298x240x220mm / 10PCS/CTN 10PCS/CTN 385*335*200mm 20PCS/CTN |
|
|
Notes |
1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. |
||
Compatible Dimmer Type
SMT50-D1 is CE 0-10V dimmer. With 0-10V analog signal to control dimming. Input voltage range 100-265Vac, output voltage DC 0-10V. SMT50-D1 is able to dimming well with EURI LIGHTING's EPN22-SMK
Related Products
|
It is 0-10V dimming led driver 12V 30 watts. Driver with junction box integrated, input and output wires can be hided on the box which is looks nice when installing.
Mode：SMT-012-030VDHV2 intput voltage：110~277V AC Efficiency > 90% Size：165*94.5*40mm （L*W*H） Weight：0.95Kg/pcs |
