dali waterproof ip66 constant current led driver for outdoor lighting
Rated ip66 this constant current led driver 1050mA max. output voltage up to 80W. It is dimmed with Dali dimming mode and certificated by ETL/CE/ROHS.Onforu brand led floodlight ON-FG24-DW-US-2 is suitable for SMT-080-1050CM.
Specification
|
Model |
SMT-090-0900CM |
SMT-080-1050CM |
SMT-057-1400CM |
SMT-038-2100CM |
|
|
Output |
DC Voltage |
50-90V |
45-80V |
35-57V |
20-38V |
|
Voltage Accuracy |
±0.5V |
||||
|
Rated current |
0～900mA |
0～1050mA |
0～1400mA |
0～2100mA |
|
|
Rated power |
80W |
84W |
80W |
79W |
|
|
Input |
Voltage Range |
100-265VAC |
|||
|
Frequency Range |
47～63HZ |
||||
|
Power Factor ( Typ.） |
PF≧0.92/120V /PF≧0.95/220V |
||||
|
Full Load Efficiency（Typ.） |
>87% |
>86% |
>85% |
>85% |
|
|
AC Current（Typ.） |
0.960A |
1.042A |
1.031A |
1.031A |
|
|
Leakage current |
﹤0.63mA/120VAC,﹤0.75mA/220VAC |
||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|||
|
OverCurrent |
≦1.4*Iout |
||||
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
|
Environment |
Working TEMP. |
-40～+50℃ |
|||
|
Working Humidity |
20～95%RH,non-condensing |
||||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||||
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
||||
|
Safety & EMC |
Safety standards |
EN61347-1EN61347-2-13 IP67 |
|||
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
||||
|
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
||||
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level（surge4KV） |
||||
|
Others |
Weight |
1Kg |
|||
|
Size |
210*69*45mm（L*W*H） |
||||
|
packing |
355*215*215mm/10pcs/CTN 220*70*50 mm for inner box |
||||
|
Notes |
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃of ambient temperature. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 2. Tolerance:includes set us tolerance,line regulation and load regulation . |
||||
 |
 |
 |
 |
Mechanical Specification
※Input Rubber cable H03VV-F 3G 1.0㎡，the green/yellow cable connect with (FG)，Brown with AC (L),Blue with AC(N)
※Input with Live Wire(L) Neutral Wire (N)
※Output LED SEC（LED+）,（LED-）
※Signal Dimming（DA1）, (DA2）DALI Non polar！
Dimming Operation
※Connect DALI signal cable of driver with DALI cable in Control then dim after controller scan and assign address
Derating Curve
※Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the service life
Compatible Dimmer Type
SMARTS waterproof led power supply ip66 1050mA can be installed both indoors and outdoors instead of some power supply only cover IP20 rate. With Dali dimming mode, it could be dimmed from 0-100%. SMT-080-1050CM can be matched with C-lite C-FL-A-RTF4/RTS4 Series led floodlight.
|
|
Related Products
|
|
Smarts Dali constant current led driver 350mA is suitable for dry/damp/wet locations and owns long warranty up to 5 years.
Mode：SMT-120-0350CM intput voltage：100~265VAC Output Voltage: 80-120vdc Output Current: 350ma Size:180*60*34mm Certification: CE,FCC,RoHS
|
