CE/ROHS 12v 24v 100w weatherproof triac dimmable led driver
|
led driver 100w 12v features a high power factor corrected and consistent dimming performance across production and temperature.It is compatible with 12v LED Strip light, module light etc. BUSCH-JAEGER dimmer 6523 is perfectly compatible.Leading edge or Trailing edge can be switchover. |
Specification
|
model |
SMT-012-100VTHWH |
SMT-024-096VTHWH |
|
|
Output |
DC Voltage |
12V |
24V |
|
Rated current |
8.33A |
4.0A |
|
|
Voltage Tolerance |
±0.5V |
||
|
Rated power |
100W |
96W |
|
|
Input |
Voltage Range |
200-240V AC |
|
|
Frequency Range |
47～63HZ |
||
|
Power Factor |
PF≥0.95（Full loading） |
||
|
Full Load Efficiency(Typ.) |
>88% |
>90% |
|
|
AC Current（Typ.） |
0.8A |
||
|
Leakage current |
﹤0.5mA |
||
|
Protection |
Short Circuit |
Hiccup mode,recovers automatically after fault condition is removed |
|
|
Over temperature |
≤120% |
||
|
Over Loading |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||
|
Environment |
Working TEMP. |
-40～+60℃ |
|
|
Working Humidity |
20～90%RH,non-condensing |
||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||
|
Vibration |
10～500Hz，2G 10min./1 cycle，period for 60min.each along X,Y,Z axes |
||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 |
|
|
Withstand voltage |
I/P-O/P:3.75KVACI/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH |
||
|
EMC EMISSION |
EN55015,EN61000-3-2,3 (≥60%loading) |
||
|
EMC IMMUNITY |
EN61000-4-2,3,4,5,6 ,11,EN61547 |
||
|
Others |
NetWeight |
1.1kg |
|
|
Size |
230*70*43mm(L*W*H) |
||
|
packing |
245*75*65mm inner box,340*275*170mm outside carton 10PCS /CTN |
||
|
Notes |
1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. 3.Loading range from 10% to 100% |
||
 |
 |
 |
 |
■ Mechanical Specification:
Ø 
Input Rubber cable H05RN-F 3*1.0mm² ,the green /yellow cable connect with (FG),Brown with AC (L),Blue with AC(N)
Ø Output Rubber cable H07RN-F 2*1.5mm²,Red is output(V+) Positive,Black is output (V-) negative.Connected to LED Lamps.
Note:Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
Ø Compatible with Leading edge and tailing edge triac dimmers.
Ø Please use a dimmer with max. power at least 1.5 times than the load.
■Derating Curve
Ø Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the working life.
■ Connection Diagram
■ Instruction:
Ø This driver should be installed by qualified and professional person;
Ø Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
Ø Ensure that wiring is correct before test in order to avoid light and power supply damage;
Ø If the dimmable LED drivers do not work normally, pl. don’t maintain privately, but contact us: sales9@smartselectronics.com Or take a phonecall: 0086-18016688251
Welcome to visit our official website: www.smarts-electronics.com and www.swinpower.com Thanks.
Compatible Dimmer Type
Smarts 100w weatherproof led driver is rated IP67 that has a water-resistant outer case. Every led driver we sell has a global warranty. And this model provides 7 years warranty. LEDELS Lighting's led module is a option when you are looking for 12VDC version.
|
Related Products
|
|
The led driver 230v 12v is a triac dimming type.Both 12VDC and 24VDC are available. The mini size is easy for installtion and put into led lights.
Mode：SMT-012-030VTHWH intput voltage：200-240VAC Dimming Mode:Triac dimming Size:155*54*20mm（L*W*H） Weight：0.21Kg/pcs |
