7 years warranty 12v 100w triac dimmable constant voltage led driver with UL
	
 
12v 100w triac dimmable led driver are high efficiency,high reliability,can save energy more than Hubbell Triac dimming power supply 100W.built-in active PFC function: PF>0.90 for 86% of load or higher. 100% full load burn-in test.
	
	  Destription  
 
	
 
	 
	 
						model 
					 
						SMT-012-100VTHW 
					 
						Output 
					 
						DC Voltage 
					 
						12V 
					 
						  
					 
						Voltage Accuracy 
					 
						±0.5V 
					 
						  
					 
						Rated current 
					 
						8.33A 
					 
						  
					 
						Rated power  
					 
						100W 
					 
						Input 
					 
						Voltage Range 
					 
						100~277V AC 
					 
						  
					 
						Frequency Range 
					 
						47~63HZ 
					 
						  
					 
						Power Factor ( Typ.) 
					 
						PF≧0.95/110V,PF≧0.97/277V 
					 
						  
					 
						Full Load Efficiency(Typ.) 
					 
						>82% 
					 
						  
					 
						AC Current(Typ.) 
					 
						1.33A/110VAC  
					 
						  
					 
						Inrush Current (Typ.) 
					 
						20A, 50%, 1.6ms 
					 
						  
					 
						Leakage current 
					 
						﹤0.5mA/110V 
					 
						Protection  
					 
						Short Circuit 
					 
						Hiccup mode, recovers automatically after fault condition  
					 
						is removed. 
					 
						  
					 
						Over temperature 
					 
						100℃±10℃ shut down o/p voltage, automatically recover after cooling. 
					 
						  
					 
						Over Loading 
					 
						≤120% constant current limiting, auto-recovery 
					 
						  
					 
						Over voltage 
					 
						≦140VAC(90~135V) , ≦270VAC(170~265V) 
					 
						Environment 
					 
						Working TEMP. 
					 
						-40~+60℃ 
					 
						  
					 
						Working Humidity  
					 
						20~90%RH,non-condensing 
					 
						  
					 
						Storage TEM.,Humidity 
					 
						-40~+80℃,10~95%RH 
					 
						  
					 
						TEMP.coefficient 
					 
						±0.03%/℃(0~50℃) 
					 
						  
					 
						Vibration 
					 
						10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z  axes 
					 
						Safety&EMC 
					 
						Safety standards 
					 
						UL8750+UL1310 
					 
						  
					 
						Withstand voltage 
					 
						I/P-O/P:3.75KVAC  
					 
						  
					 
						Isolation resistance 
					 
						I/P-O/P:100MΩ/500VDC/25℃/70%RH   
					 
						  
					 
						EMC EMISSION 
					 
						FCC Part 15 B 
					 
						  
					 
						EMC IMMUNITY  
					 
						Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level (surge4KV) 
					 
						Others 
					 
						Net Weight 
					 
						1.1Kg 
					 
						  
					 
						Size 
					 
						230*70*46mm(L*W*H)     
					 
						  
					 
						packing 
					 
						329*279*176mm , 10PCS/ctn 
					 
						Notes 
					 
						1.  All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and  
					 
						25℃of ambient temperature. 
					 
						2.  Tolerance:includes set us tolerance,line regulation and load regulation .  
					
		
			
				 
			
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
				
					 
			
				 
			
					 
				
					 
			
				 
		
	
					  Label   
				
				
					 
			
				
	
 
	  Mechanical Specification  
 
	 
Simple Connection Diagram

	
Connecting Diagram

	
Problem analysis
Question:
Why does the 100W-PWM driver (SMT-012-100VT) have 2 x output cables ?
I need a driver with a single 100W output.
Can I draw the entire 200W from one cable ? Internally is it a single output ? just 2 x wires ?
	
	
	
Answer:
Yes, the internally dimmable led driver for SMT-012-100VTHW is single output type and just 2 wires.
	
	
Packing & shipping
inner box-white box + outer carton- standard exporting carton for packing
	 
 
	
MOQ: 1 pcs
- Delivery: 7 working days for sample order,12 working days for 500pcs.
- Shipping freight are quoted under your requests.
- Loading port: Xiamen






 
	              










 
                                        
                                     
                                        
                                     
                                        
                                     
                                        
                                     
                                        
                                     
                                        
                                    






