60-100vdc 50watt 500ma dimmable led driver
The SMT-100-0500CM is 50 watt dimmable led driver with dali dimmable and constant current working mode, it's waterproof IP67 could suit for indoor and outdoor ues.Can match Zumtobel's LED downlight 50Watt.
|
Feture |
|
|
·Output constant current
·Range 100-265VAC ·Built-in PFC function, PF> 0.9 ·Efficiency >90% ·Protections:short circuit/over current/over temperature ·Cooling by free air convection ·Dimming function:DALI dimmable ·Suitable for LED lighting applications by PWM output ·Compliance to worldwide safety regulations for lighting ·Suitable for dry/damp/wet locations ·5 years warranty |
|
Specification
Model
SMT-100-0500CM
SMT-056-1050CM
SMT-040-1400CM
SMT-036-1750CM
Output
DC Voltage
60-100V
40-56V
20-40V
20-36V
Voltage Accuracy
±0.5V
Rated current
0~500mA
0~1050mA
0~1400mA
0~1750mA
Rated power
50W
58W
56W
63W
Input
Voltage Range
100-265VAC
Frequency Range
47~63HZ
Power Factor ( Typ.)
PF≧0.92/120V / PF≧0.95/220V
Full Load Efficiency(Typ.)
>86%(120V) /
>88%(220V)
>86%(120V) /
>89%(220V)
>88%(120V) /
>90%(220V)
>88%(120V) /
>90%(220V)
AC Current(Typ.)
0.990A(120V)
0.960A(220V)
1.055A(120V)
1.042A(220V)
1.047A(120V)
1.031A(220V)
1.056A(120V)
1.031A(220V)
Leakage current
﹤0.65mA/120VAC / ﹤0.75mA/220VAC
Protection
Short Circuit
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Current
≦1.4*I out
Over temperature
100℃±10℃ shut down o/p voltage, re-power on to recover
Environment
Working TEMP.
-40~+50℃
Working Humidity
20~95%RH,non-condensing
Storage TEM.,Humidity
-40~+80℃,10~95%RH
TEMP.coefficient
±0.03%/℃(0~50℃)
Vibration
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes
Safety&EMC
Safety standards
EN61347-1 EN61347-2-13 IP67
Withstand voltage
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
Isolation resistance
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
Compliance toEN55015,EN61000-3-2 (≧50%load)
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry
level (surge4KV)
Others
Weight
1Kg
Size
210*69*45mm(L*W*H)
packing
355*215*215mm/10pcs/CTN , 220*70*50 mm for inner box
Notes
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃ of ambient temperature.
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3. Tolerance:includes set us tolerance,line regulation and load regulation .
 |
 |
 |
 |
Derating Curve
* Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the service life
Mechanical Specification
※Input Rubber cable H03VV-F 3G 1.0㎡,the green/yellow cable connect with (FG),Brown with AC (L),Blue with AC(N)
※Input with Live Wire(L) Neutral Wire (N)
※Output LED SEC (LED+),(LED-)
※Signal Dimming (DA1), (DA2) ( DALI Non polar!)
■Dimming Operation
※Connect DALI signal cable of driver with DALI cable in Control then dim after controller scan and assign address
