120 Volt 277Volt AC to 12V 24V DC LED Driver Power Supply Manufacturers 30 Watt 36 Watt 60 Watt 105 Watt 150 Watt
Swinpower is the SMT-012-060VTDSP Triac & 0-10Vdimmable (5 in 1) led driver module manufacturers. Our power supplies can be used with a wide variety of in-line LED dimmers. All of our power supplies are energy efficient and eco friendly. Triac and 0-10V 5in1 dimming function with flicker free.
|
model |
SMT-012-060VTDSP |
SMT-024-060VTDSP |
|
|
Output |
DC Voltage |
12VDC |
24VDC |
|
Voltage Accuracy |
±5% |
±5% |
|
|
Rated current |
5.0Amp |
2.5Amp |
|
|
Rated power |
60W |
60W |
|
|
Voltage Regulation |
±0.5% |
||
|
Load Regulation |
±1% |
||
|
Input |
Voltage Range |
100-277 VAC |
|
|
Frequency Range |
47~63HZ |
||
|
Power Factor ( Typ.) |
0.99@120VAC 0.987@277VAC |
||
|
THD(Typ. ) @ full load |
<10%@120VAC <15%@277VAC |
||
|
Full Load Efficiency(Typ.) |
84%@120VAC 86%@277VAC |
83%@120VAC 85%@277VAC |
|
|
AC Current(Typ.) |
0.9A |
||
|
Inrush Current(Typ.) |
27.0Amp |
||
|
Leakage current |
<0.5mA |
||
|
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed. |
|
|
Over Loading |
≤120% shut down o/p voltage, re-power on to recover |
||
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
||
|
Environment |
Working TEMP. |
-40~+60℃ |
|
|
Working Humidity |
20~90%RH,non-condensing |
||
|
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||
|
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||
|
Vibration |
10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
||
|
Safety&EMC |
Safety standards |
UL8750 +UL1310,CAN/CSA-C22.2 No.250.13 |
|
|
Withstand voltage |
I/P-O/P:1.88KVac |
||
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
||
|
EMC EMISSION |
FCC 47 CFR Part 15 ,Subpart B |
||
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,,11, , Alight industry level |
||
|
Others |
Weight |
0.45Kg |
|
|
Size |
300*32*20mm (L*W*H) |
||
|
packing |
50PCS/CTN carton size:330*330*130mm
|
||
|
Notes |
1. All parameters NOT specially mentioned are measured at 110VAC, 277VAC input , Rated load and 25℃of ambient temperature. 2. Tolerance:includes set us tolerance,line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
||
 |
 |
 |
 |
Mechanical Specification
Ø Input terminals "Black" and "White" to connect to AC L and N.
Ø Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.
Ø Output terminals DIM (+) to 0/1-10V dimmer signal(+ ),DIM (-) white connect to 0/1-10V dimmer signal (-)
Ø Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Compatible Lighting Type
LED strip light fixtures are a perfect way to light up high-ceiling environments such as auto shops, workshops, garages, hallways, parking garages, and other industrial and commercial spaces. led driver power supply from Swinpower can work well with 4' Corner Light Fixture from superbrightleds.
 |
|
Related Products
|
|
This ul listed led dc driver features a universal input range of 120-277V and has a maximum load of 60W. This (CLASS 2) 60w slim power supply 24v 12v has surge, short circuit and overload protection. This 12v constant voltage led dc power supply is UL/cUL recognized for wet dry or damp locations.
Mode：SMT-012-060VTDSW intput voltage：100~277V AC Efficiency > 82% Size：300*32*20mm（L*W*H） Weight：0.5Kg/pcs |
