waterproof ip67 12v 200w constant voltage led driver for led lighting
12v power supply is consant voltage design.we give 2 years warranty and it is suitable for indoor & outdoor LED illuminating lights,can replace Hubbell LED power supply to install in humid place
Features
- IP67 design for indoor or outdoor installations
-
Protections:Short circuit/Overload/Over temperature
- Cooling by free air convection
-
100% full load burn-in test
- Suitable for LED lighting
- Products through UL,CE,RoHS Certification
- 2 years warranty
Product parameters
| SPECIFICAION | |||||
| MODEL | SMT-012-200VN | SMT-024-200VN | |||
| OUTPUT | DC VOLTAGE | 12V | 24V | ||
| RATED CURRENT | 16.6A | 8.3A | |||
| CURRENT RANGE | 0~16.6A | 0~8.3A | |||
| RATED POWER | 200W | 200W | |||
| RIPPLE&NOISE(max) | 600mV | 600mV | |||
| VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |||
| SETUP RISE TIME | 80ms/220VAC | ||||
| HOLD UP TIME(Typ.) | 60ms/220VAC | ||||
| INPUT | VOLTAGE RANGE | 170~265VAC | |||
| FREQUENCY RANGE | 50~60Hz | ||||
| POWER FACTOR(Typ.) | |||||
| EFFICIENCY(Typ.) | ﹥82% | ﹥84% | |||
| AC CURRENT(Typ.) | 1.59A/220VAC | 1.57A/220VAC | |||
| INRUSH CURRENT (Typ.) | COLD START 50A/220VAC | ||||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |||
| Overload | 16.6-18.2A | 8.3-10.2A | |||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||||
| ENVIRONMENT | WORKING TEMP. | -30~+55℃ (Refer to output load derating curve) | |||
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||||
| SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP67 approved | |||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
| EMC Test Standards | |||||
| NOTE |
1.All parameters NOT specially mentoned are measured at 220VAC input,rated load and 25℃ of ambient temperature. 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. 3.Tolerance:includes set up tolerance,line regulation and load regulation. |
||||
| Label |
 |
||||
 |
 |
 |
 |
Application
All of our drivers are got ETL CE SAA ROHS listed .OEM Welcome.
Our led drivers are widely used for:
- 1.Indoor LED illuminating lights
- 2.LED Neon, LED urban Decoration
- 3.LED Lighting Advertising,LED Display
- 4.Safety Protection Apparatus
- 5.Telecommunications, Networks
- 6.Vehicle Lights, Controller Panels
