ip20 flicker free dali dimmable led power supply 700ma 1200ma 1500ma
SMT-050CMM dimmable led power supply, with 100-265VAC input voltage and built-in two stage PFC function. Suitable for use in a range of suitable commercial and domestic lighting applications, SMARTS's led power supply constant current can proved to be the perfect solution for signage, safety, architectural and security lighting opportunities. Multi-current DIP Adjustment output,15W/25W/50W available.
Specifications
|
Model |
SMT-050CMM ( adjustable current) |
||||||||
|
Output |
Rated current |
1500mA |
1400mA |
1200mA |
1050mA |
900mA |
700mA |
||
|
Current Tolerance |
±5% |
||||||||
|
DC Voltage |
10-34V |
10-36V |
10-42V |
10-48V |
10-50V |
10-50V |
|||
|
Rated power |
51W |
50.4W |
50.4W |
50.4W |
45W |
35W |
|||
|
Open Circuit Voltage (Max.) |
52-60Vdc |
||||||||
|
Input |
Rated Input Voltage |
100-265VAC |
|||||||
|
Rated Frequency: |
47-63HZ |
||||||||
|
Power Factor |
PF≥0.99/100VAC PF≥0.92/230VAC PF≥0.87/240VAC(Full loading) |
||||||||
|
Full Load Efficiency(Typ.) |
>81% |
>81% |
>82% |
>83% |
>83% |
>82% |
|||
|
AC Current(Max.) |
0.58A |
0.57A |
0.57A |
0.56A |
0.50A |
0.40A |
|||
|
Leakage current |
<0.50mA |
||||||||
|
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
|||||||
|
Over temperature |
95℃±10℃ shut down o/p voltage, re-power on to recover |
||||||||
|
Over Load |
≤120% |
||||||||
|
Protection Class: |
II |
||||||||
|
Environ- ment |
Working TEMP. |
-40-+60℃ |
|||||||
|
Working Humidity |
20-95%RH,non-condensing |
||||||||
|
Storage TEM. Humidity |
-40-+80℃,10-95%RH |
||||||||
|
TEMP. coefficient |
±0.03%/℃(0-50℃) |
||||||||
|
Vibration |
10-500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes |
||||||||
|
Safety & EMC |
Safety standards |
EN61347-1 EN61347-2-13 |
|||||||
|
Withstand voltage |
I/P-O/P:3.75KVAC |
||||||||
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
||||||||
|
EMC EMISSION |
EN55015, EN61000-3-2,3 (>50% load) |
||||||||
|
EMC IMMUNITY |
EN61000-4-2,3,4,5,6 ,11, EN61547,A light industry level |
||||||||
|
Others |
Weight |
0.35Kg |
|||||||
|
Size |
178*61*24mm(L*W*H) |
||||||||
|
packing |
290*215*140mm(20PCS/CTN ) 185*65*28mm for inner box |
||||||||
|
Notes |
1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set us tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again |
||||||||
 |
 |
 |
 |
Mechanical Specification
Ø Input with Live Wire(L) Neutral Wire (N)
Ø Output LED SEC output Positive(LED+),output negative(LED-).Connected to LED Lamps.
Ø Signal Dimming DA1, DA2 ( No polar ) connected to the BUS of the DALI Master.
Ø Suggested wire diameter: Input 0.75-2.5mm2; Output: 0.5-2.5mm2
Ø Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Note: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Derating Curve
Ø To extend their life, please refer to the Derating Curve and derate according to the temperature.
Dimming Operation
Operation Reference No.1:
Ø Please refer to Diagram 1. Connect the Dali signal line to the Dali bus of the controller (the Dali Master).
After Dali Master scanning and address assignment, the driver can be successfully dimmed.
Ø Notice:In the market, some DALI controllers has bus-powered functions .If not,please add an extra power supply.(DALI Power).
Ø Any incorrect connecting of signal line and output line would damage the master.
Operation Reference No.2:
Ø Please refer to Diagram 2. Connect the Dali signal line to the Dali controller.
Operation Reference No.3:
Ø Please refer to Diagram 3 Connect the Dali signal line to the Dali dimmers.
Compatible Dimmer Type
As an open standard, DALI (Digital Addressable Lighting Interface) is internally recognized as the premier new lighting control interface and is cross-compatible across lighting components from different manufacturers. SMARTS's have issued relative DALI dimmer which can totally matched with dali led power supply.
  |
|
Related Products
|
|
SMT-020CMM is the flicker free dimmable led power supply, with 100~265VAC input voltage and is a 20 watt led driver with multi-stage constant current output, allowing multiple current levels, 250mA, 350mA, 400mA, 450mA, 500mA, 550mA, 600mA, 700mA are easily switched by adjusting the built-in DIP switch.
Mode：SMT-020CMM intput voltage：100~265V AC Efficiency > 82% Size：140*45*28mm （L*W*H） Weight：0.13Kg/pcs |
|
|
