IP20 500mA constant current 0-10v dimmable led driver
0-10V led constant current driver has superior PWM dimming technology and the protection of short circuit/over current/over voltage. It could be compatible with some super brands dimmer such as LUTRON and Eaton.
Specification
|
Model |
SMT-020-0900CD |
SMT-025-0700CD |
SMT-035-0500CD |
SMT-040-0500CD |
||
|
Output |
DC Current |
900mA |
500mA |
500mA |
||
|
Current Accuracy |
±3% |
|||||
|
Voltage Range |
12-20V |
15-25V |
20-35V |
20-40V |
||
|
Rated power |
18W |
17.5W |
17.5W |
20W |
||
|
Input |
Voltage Range |
100～265VAC |
||||
|
Frequency Range |
47～63HZ |
|||||
|
PF(Typ.） |
PF>0.9 |
|||||
|
Full Load Efficiency（Typ） |
>86%(110V) >89%(220V) |
>87%(110V) >88%(220V) |
>87%(110V) >89%(220V) |
>87%(110V) >90%(220V) |
||
|
AC Current (Typ.） |
0.104A(110V) 0.106A(220V) |
0.102A(110V) 0.103A(220V) |
0.102A(110V) 0.103A(220V) |
0.101A(110V) 0.103A(220V) |
||
|
Leakage current |
<0.72mA/110VAC /﹤0.75mA/220VAC |
|||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
Over Current |
≦1.4*Iout |
|||||
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
|||||
|
Environment |
Working TEMP. |
-40～+50℃ |
||||
|
Working Humidity |
20～95%RH,non-condensing |
|||||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
|||||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
|||||
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
|||||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. IP20 |
||||
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
|||||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
|||||
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
|||||
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
|||||
|
Others |
Weight |
0.2Kg |
||||
|
Size |
140*45*27mm（L*W*H） |
|||||
|
packing |
320*280*215mm/50pcs /CTN 145*50*36mm for inner box |
|||||
|
Notes |
1. All parameters NOT specially mentioned are measured at110VAC,220VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
|||||
 |
 |
 |
 |
Mechanical Specification
Ø Input with Live Wire(L) Neutral Wire (N)
Ø Signal Dimming (0/1-10V)（DIM+）, (DIM-）
Ø Output LED SEC（LED+）,（LED-）
Dimming Operation
Ø Built-in 3 in 1 dimming function, IP20 rated .Output constant current level can be adjusted through output cable by connection a resistance or 0/1-10V DC or 10V PWM signal between DIM+ and DIM-
Ø Please DO NOT connect “DIM-“ to “LED-“
※Reference resistance value for output current adjustment (Typical)
|
Resistance value |
Signle driver |
0Ω |
10KΩ |
20KΩ |
30KΩ |
40KΩ |
50KΩ |
60KΩ |
70KΩ |
80KΩ |
90KΩ |
100KΩ |
OPEN |
|
Multiple drivers |
0Ω/N |
10KΩ/N |
20KΩ/N |
30KΩ/N |
40KΩ/N |
50KΩ/N |
60KΩ/N |
70KΩ/N |
80KΩ/N |
90KΩ/N |
100KΩ/N |
—— |
|
|
Percentage of rated current |
0% |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
100% |
102％-108％ |
|
※1-10/0-10V dimmable function for output current adjustment(Typical)
|
Dimming value |
0V |
1V |
2V |
3V |
4V |
5V |
6V |
7V |
8V |
9V |
10V |
OPEN |
|
Percentage of rated current |
0% |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
100% |
102％-108％ |
※10V PWM signal for output current adjustment (Typical): Frequency range:100Hz-3KHZ
|
Duty value |
0% |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
100% |
OPEN |
|
Percentage of rated current |
0% |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
100% |
102％-108％ |
Ø Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the working life.
Connect Drawing
Instruction:
※This driver should be installed by qualified and professional person;
※Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
※Ensure that wiring is correct before test in order to avoid light and power supply damage;
※If the dimmable LED drivers do not work normally, pl. don’t maintain privately, but contact us: sales9@smartselectronics.com Or take a phonecall: 86 18016688251
Official website: www.smarts-electronics.com
Compatible Dimmer Type
0 10v dimmable constant current led driver is suitable for the Eaton DF10P-C1 dimmer and Lutron DVSTV-WH dimmers, which is compatible perfectly and well operational. The type of this energy efficient dimmable LED driver could be dimmed from 0-100%.
|
|
Related Products
|
|
300mA 0 10 v dimming led driver is designed for applying in dry location,and deserving 5 years warranty.
Mode：SMT-050-0300CD intput voltage：100~265V AC Output Voltage:30-50vdc Efficiency 86% Dimming Mode: 0-10v dimmable Size: 140*45*28mm Certification: CE,ETL ,FCC,ROHS |
