Smarts electronic provide a kind of ultra slim type constant voltage triac dimming led driver. Work with leading edge and trailing edge triac dimmers available. Full protection aluminum housing, for dry, damp, wet location. Suitable for Parmida LLC LED lighting and moving sign applications.
Specification
|
model |
SMT-012-036VTSPH |
SMT-024-036VTSPH |
|
|
Output |
DC Voltage |
12VDC |
24VDC |
|
Voltage Accuracy |
±5% |
±5% |
|
|
Rated current |
3.0Amp |
1.5Amp |
|
|
Rated power |
36W |
36W |
|
|
Voltage Regulation |
±0.5% |
||
|
Load Regulation |
±0.5% ±1% |
||
|
Input |
Voltage Range |
220-240VAC |
|
|
Frequency Range |
47～63HZ |
||
|
Power Factor ( Typ.） |
PF≥0.96/230VAC |
||
|
THD(Typ. ) @ full load |
<20% |
||
|
Full Load Efficiency（Typ.） |
>80% |
>80% |
|
|
AC Current（Typ.） |
0.23A/220VAC |
||
|
Inrush Current（Typ.） |
34A,50%,104us@230VAC |
||
|
Leakage current |
<0.5mA |
||
|
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed. |
|
|
Over Loading |
≤120% shut down o/p voltage, re-power on to recover |
||
|
Protection Class |
II |
||
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
||
|
Environment |
Working TEMP. |
-40～+60℃ |
|
|
Working Humidity |
20～90%RH,non-condensing |
||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||
|
Vibration |
10～500Hz，2G 10min./1 cycle，period for 60min.each along X,Y,Z axes |
||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 EN62493 |
|
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG: 100MΩ/500VDC/25℃/70%RH |
||
|
EMC EMISSION |
EN55015 EN61000-3-2 EN61000-3-3 |
||
|
EMC IMMUNITY |
EN61000-4-2,3,4,5,6,11 EN61547 |
||
|
Others |
Weight |
0.2Kg |
|
|
Size |
260*30*18.5mm(L*W*H) |
||
|
packing |
50pcs /CTN SIZE: 330X275X130mm |
||
|
Notes |
1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
||
| Label |
 |
||
 |
 |
 |
 |
Mechanical Specification
Ø Input with Live Wire(L) Neutral Wire (N)
Ø Output terminals "Red" to LED Positive side (+) and "Black" to LED Negative side (-).
Connecting Diagram
Simple Connection Diagram
What happens if you use a non dimmable LED with a dimmer?
Some of the issues that may occur when a dimmer is incompatible with an LED lamp are: Flickering - Lamps will flicker (can also occur if a non-dimmable lamp is used) Drop-out - No light output at the end of the scale. ... Damage or failure - LED driver, circuit or LED is damaged or fails. So if you want your lights to change the brightness, you must choose a dimmable led driver.
