English

banner

DT6 DALI 2 PUSH dimmable waterproof rohs led power supply 24v 300w applicable to United States and Canada

DALI 2 push Dimmable waterproof led power supply 12v 300w engineered for durability, Effectively extend the service life of LED power supply and lamps.
  • Brand:

    SMARTS
  • Item No.:

    SMT-24300V-DP2
  • Input Voltage:

    100-277Vac
  • Output Voltage:

    12VDC/24VDC/36VDC/48VDC
  • Working Mode:

    Constant Voltage
  • Dimming mode:

    DALI 2&PUSH Dimmable
  • Size:

    301*78*25.1mm
  • Certification:

    UL
Products description

waterproof led power supply 24v 300w


DT6 DALI 2 PUSH dimmable waterproof rohs led power supply 24v 300w applicable to United States and Canada


DALI 2 push DT6 dimmable 24v led driver 300W Built with high-quality components to minimize maintenance & replacement costs.


  Specification  


Model SMT-12300V-DP2 SMT-24300V-DP2 SMT-36300V-DP2 SMT-48300V-DP2
Output DC Voltage 12V (12-13V adjust by NFC) 24V (24-25.5V adjust by NFC) 36V (36-38V adjust by NFC) 48V (48-50V adjust by NFC)
Voltage Tolerance ±0.2V
Rated current 25A  12.5A 8.34A  6.25A
Rated power 300W
Load Regulation ±2%
Input Standby power consumption  ≤0.5W ≤0.5W ≤0.6W ≤0.6W
Voltage Range 110-277VAC 
Frequency Range 47 - 63Hz
Power Factor(Typ.)@ full load PF≥0.98@120VAC  PF≥0.95@230VAC  PF≥0.90@277VAC (Full loading)
THD(Typ.)@ full load ≤10%@120VAC ;  ≤10%@230VAC;  ≤15%@277VAC
Efficiency(Typ.)@ full load 88%@120VAC;    89%@120VAC;   91%@230VAC;   91%@277VAC
AC Current(Max.) 3.5A 3.5A 3.5A 3.5A
Inrush Current (Typ.) 60A,9us@50%Ipeak(120VAC);70A,188us@50%Ipeak(230VAC)    180A,4.4us@50%Ipeak (277VAC)  
Leakage current <0.5mA 
Protection Short Circuit Hiccup mode, recover automatically after fault condition is removed
Over Load ≤120% ,hiccup mode, recover automatically after fault condition is removed 
Over temperature Ambient temp. over 55℃±10℃, output will be off; recovers automatically after temp. drops.
Environment Working TEMP. -40~+70℃ (see below derating curve)
Working Humidity 20 - 95%RH,non-condensing 
Storage TEM.,Humidity -40 - +80℃,10 - 95%RH
TEMP.coefficient ±0.03%/℃(0 - 50℃)
Vibration 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes 
Safety&EMC Safety standards EN61347-1   EN61347-2-13 (EU)   &  UL8750  (US) 
Withstand voltage I/P-O/P:3.75KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC (EU);   I/P-O/P:1.88KVAC (US)
Isolation resistance I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH  
EMC Emission EN55015   EN61000-3-2  EN61000-3-3 (EU)≥50% Load  &  FCC Part 15 B (US)
EMC Immunity EN61000-4-2,3,4,5,6 ,11,  EN61547
Others Weight 1.15KG
Dimension 301*78*25.1mm (L*W*H)
packing 390*325*185mm/20PCS/CTN    G.W.:24KG/CTN
Notes 1. All parameters NOT specially mentioned are measured at 120VAC/230VAC input , rated load and 25℃of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.

Click Send Email for Details
Click skpye 24 hours Online Reply
Scan to start our communication
Back to top


  Mechanical Specification  

Input & Output wiring

※Input Rubber cable 3*1.0mm², the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N)  

※Output rubber cable 2*1.5mm² x2 groups for 12VDC model, Red is output ( V+) Positive, Black is output (V-) negative.

※Output rubber cable 2*1.5mm² one group for 24VDC, 36VDC, 48VDC models, Red is output ( V+) Positive, Black is output (V-) negative . Connected to LED Lamps

 

Dimming wiring

Dimming Rubber cable 2*1.0mm², Blue DA/N and White DA/L (No polar) connected to the DALI BUS when use DALI function .

Blue (N) is connected to AC (N) while white (L) is connected to Push dim switch dimmer( L) when use Push function..

※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.

 

Note:  there is external antenna at output side.  Don't disassemble!


waterproof led power supply 24v 300w

 Dimming Operation 

Note: For DALI Dimming Wiring Diagram 3, please noted that only one DALI power is need in the DALI bus, so no extra DALI power is needed if the Master or Dimmer already includes the DALI Power.

waterproof led power supply 24v 300w



  Related Products  

waterproof led power supply 24v 300w

277V TRIAC dimming led driver 300W with Junction Box Can effectively protect the power supply and extend its service life


Model: SMT-012-300VTHW2J

Input Voltage: 100-277VAC

Dimming Mode: Triac Dimmable
Size: 455*87*60mm (L*W*H)
Certification:UL,FCC,RoHS


Leave a message
To know more our LED drivers/power supplies/LED transformers, pl. send email to us, we will reaply you soon.
Categories
Related Product
30w led driver

dali 2&push dimming constant voltage led drivers power supply 12v/24v/36v/48v 30w

Plastic case dali 2& push dimmable 12V/24V/36V/48V 30W led driver Constant voltage working mode, efficiency up to 83%, dimming range from 0 to 100%, both ends can be removed, no exposed wires, easy to install, quick and safe
12v 60w dimmable led driver

60w 12v dali 2& PUSH dimmable LED driver power supply price

Smarts 60W DALI dimming led driver The SMARTS 60W Dali Dimming LED driver is UL certified. The input voltage ranges from 100 to 277vac. The built-in NFC function allows you to adjust the output voltage as required
100w led power supply

dali 2 & push dimming 12 volt constant voltage light led driver power supply

ip67 waterproof constant voltage led driver 100W is dali2&push dimming mode, in accordance with dali protocol, input voltage is 100-277vac, the body is made of aluminum shell, can effectively protect the internal parts of the body from external damage, suitable for outdoor installation projects in humid areas
dali dimmable led drivers

150w 12V/24v dali 2& push dimmable constant voltage led driver price

The dali2 &push dimmable led driver 150W complies with dali dimming protocol IEC62386 and works in constant voltage mode with an efficiency of up to 91%
waterproof led power supply 12v 200w

UL certification 200W dali2&push dimmable constant voltage led power supply

dali2 & push dimming led driver 200W Input voltage of 100-277vac dimming range of 0-100%, with short circuit, overload, overtemperature protection design, can protect the life of the power supply from all aspects
300w led drivers

dali 2& push dimmable electronic led power supply transformer 12v 300w led driver

high power dali 2 & push dimming 300W led driver Aluminum case, cooled by free air convection, good heat dissipation performance, waterproof class ip67, suitable for outdoor intelligent lighting projects

SMARTS

Connect With Us
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Way to contact us.
Copyright © Swin Technology Co., Ltd..All Rights Reserved. dyyseo.com / Sitemap / XML
Welcome to SMARTS
To know more our LED drivers/power supplies/LED transformers, pl. send email to us, we will reaply you soon.

Home

Products

About

Contact